LED Linear Trunking System
Seamless Continuous Linear Lighting
Solve your pain to wiring and installation
No need for bridges, no need to purchase additional materials, no wiring, provincial construction period, installation fees, labor costs, auxiliary materials cost, ceiling decoration costs, is a cluster lighting system.
1). 60 seconds quick installation without any tools
2). Low installation cost-simply splicing to complete without
the additional materials. Reduced the labor cost of wiring and fixture installation.
3). A three-phase circuit is preser in the track and the lamp can be individually controlled as required.
4). Dimming model: 0-10V and Dali for optiona.
5). Emergency Mode: Emergency Battery / UPS System.
6). Sensor mode: microwave sensor and daylight sensor.
7). X, L and T standard module mode connectors.
8). Mounting options: Surface mounted chains or ropes.
9). Wide range of optics from 30° to 120° distribution, and double symmetrical distribution.
Trunking Rail:
- The track is the bracket to fix the lamp body
- The circuit preset in the track powers the lamp body
- Splicing between tracks to form a system
- The rails are pre-wired within the factory and are available in three standard sizes: 3,5,and 7wires.The 5th line is the basic power supply line,and the other line outside the 5th line is the function line,dimming and emergency functions.
- There are 3 fire wires in 5 wires,and a common zero line and ground wire; toggle the phase selection terminal in the track to connect the lamp body to different electrical circuits.Three Fire Wire external switches can easily realize the group management of different lamps in the system.
- A 2.5 square wire cable with a maximum current of 12A.One wire allows the installation of 2640W lamps.
- The track length is available in three sizes:600mm/1200mm/1500mm, which corresponds to a lamp body of the same length.
Wire
2.5mm² wire diameter pure copper wire, the maximum allowable current is 12A
Splice piece
The unique splicing way ensures the safety and stability of the use process
Splicing terminal
The wiring is safe and fast, with detection holes, simple structure, easy to install and test
3-loop switch control
The three-loop function controls the lights individually by means of three switches, SW1, SW2, SW3(on/off). These three switches connected to L1, L2, L3.
The lamp are all on during the working time.
Keep two-thirds of the light on during overtime
Keep one-third of the light on at the break time
All lamps are off after the duty
Seamless Continuous Linear Lighting
Modules for optional
6870AE Lighting Modules
Working voltage: AC200-240V 50/60Hz
Light source: Sanan /Epistar 2835 LED
CRI: >80 (>90 on request)
CCT: 2700K/3000K/4000K/5000K/6500K
Light efficiency: 130lm/w or 160lm/w
Beam angle: 60° / 90° / 120°
Driver: OSRAM
Driver can be ON.OFF, 1-10V or Dali dimming
Material: Aluminum Profile
Finish: White (Other colour on request)
Installation: suspended, surface mounted
IP rating: IP40 grade
| Model No. | Length | Watt |
|---|---|---|
| ADW6870AE-0624-5X | 577mm | 15/18/21/24W |
| ADW6870AE-1236-5X | 1150mm | 28/36W |
| ADW6870AE-1560-5X | 1437mm | 36/44/52/60W |
6870BE Lighting Modules
Working voltage: AC200-240V 50/60Hz
Light source: Sanan /Epistar 2835 LED
CRI: >80 (>90 on request)
CCT: 2700K/3000K/4000K/5000K/6500K
Light efficiency: 130lm/w or 160lm/w
Beam angle: 30° / 60° / 90° / Double 25° / Asymmetric 15°
Driver: OSRAM
Driver can be ON.OFF, 1-10V or Dali dimming
Material: Aluminum Profile
Finish: White (Other colour on request)
Installation: suspended, surface mounted
IP rating: IP40 grade
| Model No. | Length | Watt |
|---|---|---|
| ADW6870BE-0624-5X | 577mm | 15/18/21/24W |
| ADW6870BE-1236-5X | 1150mm | 28/36W |
| ADW6870BE-1560-5X | 1437mm | 36/44/52/60W |
Track Rail Module
Connected into the system as the electric connector of the track spot light, which can provide power and installation position, reduce the overhead installation cost. Maintain the unity of the whole system-one, make the wholespace effect neat and beautiful.
Sensor Module
The sensing module needs to be used with the dimming module. Different from manual switch dimming,the use of induction modulecan realize automatic dimming of the system,high efficiency andenergy saving,suitable for office,factory or warehouse.
The induction is divided into daylight induction and microwave induction.
Escape Sign Module
Widely used in shopping malls, supermarkets, hotels, entertainment venues, stations, public buildings and other places for emergency evacuation of lighting instructions.
Blank Cover Module
When no need to install lighting, can assemble blank cover module to prevent the cable from leaking out,so that the overall lighting system is neat and tidy.
Socket Module
This module allows power to be supplied to third-party appliances from the track trunking.
Node Connector
All system components can be combined without tools. X, T and L connectors expand the system’s application range.
Each node connector has diverse of electrical feed-in and feed-out. The node connector is not only to connect the cross trunking, but also to connect the wire inside the trunking, and the node connector itself could even be the electricity feed-in point.
L Node connector
T Node Connector
X Node Connector
Lighting project for reference
We respect your confidentiality and all information is protected.
AIDIWATT Lighting Co., Ltd.
Address: Building D, Gongming Dianlian Technology Building, Guangming District, Shenzhen, China
WhatsApp: 008615919891625
Phone: +86 0755 23227859
Email: sales@aidiwatt.com / aidiwattlighting@gmail.com
Talk with Whatsapp and Wechat:
